How To Build a Raised Dog Bed

Cutting the Boards

• Cut two pieces of the 7-¼-in. poplar at 41-½-in. for the front and back legs.
• Cut two more pieces of the 7-¼-in. poplar at 30 inches for the side legs.
• Cut one plywood bottom at 30 x 40 inches.
• Rip three ¾ x 48-in. cleats from the remainder of the plywood.
• Cut two cleats at 34-½-in. and two side cleats at 24 inches.
  • Pro tip: Always check the width of the board. Sizes may vary coming from the store.

Article source here: How To Build a Raised Dog Bed

Article source here: