How to Make a DIY Storage Ottoman

Cut the Box Parts

• First cut the front, back and sides according to the cutting list.
• Cut the remainder of the parts after the box is glued together.
• At this point, move on to cutting rabbits on the front, back and sides.

Cutting Rabbit Joints

• If available, install a dado blade on your table saw. You can also use a router with a rabbiting bit to cut rabbit joints. Or make multiple passes on your table saw to cut rabbits.
• Cut 1/2-in. wide x 1/4-in. deep rabbit along the two sides and the bottom edge of both side boards.
• Next, cut another rabbit 1/2-in. wide x 1/4-in. deep along the bottom edge of the front and back boards.
• Remove the dado blade and re-install your table saw blade.

Article source here: How to Make a DIY Storage Ottoman