Start the Hexagon Tiles
To cut the 15 hexagon tiles, you’ll need a jig. I started with a 2-ft. x 2-ft. melamine sled.
I set my table saw fence to 12 inches and made a partial cut into the sled. I attached a fence at a 120 degree angle with a few screws then fastened a pair of toggle clamps to the fence. Then, I cut 8-1/4-in.-wide strips of 3/4-in. plywood into 10-inch pieces until I had 16 parallelograms.
Article source here: 2-in-1 Workbench and Bar Top
No comments:
Post a Comment