How to Make Easy DIY Trim

Sawhorse Setup

• Set up two sawhorses about six feet apart.
• Make two four-foot attaching cleats by cutting an eight-foot 2×4 in half. Secure these boards to the top of each sawhorse using 2-1/2-in. screws.
• Attach an eight-foot 2×4 on top of the two attaching cleats as a cross-support, with a long edge flush with the end of each cleat, joining the two sawhorses together.
• Attach another eight-foot 2×4 cross support to the attaching cleats about one inch away from the first cross-support.
• Lay another eight-foot 2×4 on top of the attaching cleats and parallel to the other long 2x4s, as a moveable cross-support.

Article source here: How to Make Easy DIY Trim