Cutting List
Project Plans
Edge band the shelves
Rip and crosscut the ½-in. and ¼-in. plywood to the dimensions based on the Cutting List. Cut the edge banding to a rough length with a utility knife. Iron on the edge banding to one edge of the cabinet shelves (A). Roll the edge banding with a J-roller or scrap wood to ensure good adhesion. Set the edge banding against the workbench and trim the excess edge banding with a utility knife. Sand the corners of the edge banding.
Article source here: How to Make a Sliding DIY Mirror Frame
Article source here:
No comments:
Post a Comment