If you’re finishing your attic, insulating it to the proper R-value can cause a dramatic loss of headroom if you limit yourself to fiberglass batts. To maximize headroom, properly insulate your attic and ventilate the roof, use a combination of dense batt insulation, rigid foam sheeting and air chutes.
Most building codes require a specified minimum amount of headroom, and it’s tough to meet this requirement when insulating a finished attic, especially since most codes require insulation equal to R-38 or more. However, most inspectors I’ve spoken with will lower the insulation requirement if it means that the finished attic will have the required headroom. To get the most R-value with the least thickness, use batt insulation with higher R-value per inch in combination with rigid foam insulation. Rigid foam sheeting has an R-value ranging from R-5 to R-10 per inch of thickness. This means you can have a combined R-value ranging from R-23 to R-31 with only 5-½ inches of combined fiberglass and foam insulation.
Video: Working With Mineral Wool Insulation
Why Your Roof Needs Air Chutes
- To effectively ventilate your roof, create a 1-inch airspace from the soffit to the ridge by installing a continuous air chute in each rafter bay.
- Note: Air chutes, when combined with soffit vents and a ridge vent, will help prevent problems with condensation and ice dams.
Article source here: Finishing an Attic
Article source here:
No comments:
Post a Comment