Deep Clean Your Dyson Vacuum in 12 Easy Steps

Have you noticed that your Dyson vacuum’s suction isn’t as strong as when you first got it? It’s likely time for a thorough cleaning to restore its suction power. Keeping your vacuum clean not only helps maintain its performance but also extends its lifespan. Since Dyson vacuums are not exactly cheap to replace, it’s worth taking care of your investment. Additionally, cleaning the filter protects the vacuum’s motor and ensures it effectively captures small harmful particles you should avoid breathing in.

All Dyson vacuum models have similar setups. I have the V12 Dyson vacuum, and cleaning it was quite easy. A vacuum brush roll cleaning tool is a must-have tool for cleaning vacuums, especially if you often vacuum long hair or pet hair. It’s a small tool with a sharp tip that cuts away hair that gets wrapped around the vacuum head. They are only a few dollars and will save you the frustration of freeing your vacuum from tangled hair. Another option would be to use a thread cutter, which can be more versatile than scissors since they can be too bulky to reach underneath the tangled hair.

Cleaning your Dyson vacuum takes only a few minutes, and any DIYer can easily manage this quick task.

Tip: Clean the vacuum immediately after use or when you can manage without it for a day, as it takes 24 hours for the vacuum parts to completely dry.

Dyson Overview

Empty the canister

If you are cleaning a cordless vacuum, ensure it is off. If you have a corded vacuum, confirm it is unplugged.

Locate the Dyson canister and empty it over a trash bin. Most Dyson cordless models have canisters that can be opened by pressing a red bin release button located near the handle. Gently knock it against the bin if any dust or debris is stuck.

Deep clean the canister

Pull the red dust bin trigger switch located underneath the red bin release button to remove the canister container from the vacuum. After opening it, clean the vacuum cleaner with a paintbrush to remove fine dust particles (do this over a trash bin to catch the dust).

Next, gently wipe the inside of the canister container using a damp microfiber cloth. Be sure to clean the seal on the canister’s closure as well. After wiping it, use a dry microfiber cloth to remove any damp areas. Allow the canister to dry for 24 hours before reattaching it to the vacuum.

Clean the Dyson vacuum head

To remove the brush roll bar from the cleaner head, first, loosen the end cap that secures it. On the side of the cleaner head, there is a slot where you can insert a coin or a screwdriver to unlock it by turning it a quarter turn. A coin is preferred, as it is less likely to damage the end cap.

Remove any tangles of hair from the brush roll, then clean the bristles with a paintbrush to eliminate dust. Wipe down the brush roll between the bristles using a damp microfiber cloth. Next, check the neck of the cleaner head where it connects to the wand and use the microfiber cloth to wipe away any dust or debris that may have accumulated. Wipe any damp areas with a dry microfiber cloth.

Check the wand or hose

The V12 stick vacuum comes with a wand rather than a hose, but regardless of the type you have, it’s essential to check for blockages to ensure powerful suction. If there is a blockage, use a thin object, like a wire hanger, to push it out.

Clean the attachments

If you have attachments, quickly wipe them down. If the attachment is made entirely of plastic, you can rinse it under tap water. Ensure there are no blockages, and clean the connection area thoroughly so they seal properly when used. Once you finish cleaning, dry everything with a microfiber cloth.

Wipe down the outside of the vacuum

Wipe down the vacuum cleaner’s body with a damp microfiber cloth and dry it off.

How To Clean the Filter on a Dyson Vacuum

Remove the vacuum filter

If you are cleaning a cordless vacuum, ensure that it is turned off, and if you have a corded vacuum, ensure it is unplugged.

Locate and remove your Dyson vacuum filter based on the model of your Dyson vacuum. They are usually located at the very top of the vacuum. If you are unsure, consult the manual.

Clean the filter

Gently tap the filter against the side of your garbage bin to knock off any dust or debris stuck to it.

Rinse your filter using cold tap water, gently massaging it with your hands. Avoid using detergents. Fill your filter with water, cover the open ends with your hands, and give it a good shake to get rid of the dirt. You may need to repeat this process a few times until the water runs clear. After that, shake the filter firmly to remove any remaining water.

Dry the filter

Once you’ve washed your filter, leave it to dry for at least 24 hours in a spot with good airflow, like next to a fan or an open window. It’s important that your filter is totally dry before you pop it back in the machine, or you risk damaging the motor. Once it is dry, put the filter back on.

FAQ

Can I wash my Dyson vacuum attachments?

Yes, plastic attachments can be rinsed off with cold tap water and a microfiber towel. Ensure they are completely dry before using them again.

Can you wash all Dyson parts?

No, not all parts of a Dyson vacuum can be washed with water. The filter can be rinsed, while you can wipe down the canister, plastic accessories, and brush bar with a damp microfiber cloth. Any parts that are safe to clean should be left to dry for at least 24 hours before reassembly.

How often do you need to clean a Dyson filter?

Dyson recommends cleaning vacuum filters monthly or more often if you frequently clean up a lot of dust.

The post Deep Clean Your Dyson Vacuum in 12 Easy Steps appeared first on Family Handyman.

Article source here: Deep Clean Your Dyson Vacuum in 12 Easy Steps