Stair runners are useful to minimize noise and reduce the risk of slipping. If you have hardwood steps, consider this stair runner project you can do in a weekend.
This project was created by Jen Woodhouse, a Kentucky mom who had her familys (and pets) needs in mind. “We have an 11-year-old, 100-pound Rhodesian Ridgeback named Watson. Going up and down the hardwood stairs was getting pretty scary for him and for me, she says.
Woodhouses stair runner project takes a weekend to finish. Here is the step-by-step.
Prep the stairs
Since the wood has been unfinished for over a year, the stairs were looking pretty grimy from the daily foot traffic. There were scuffs, spots and drips, so I sanded each stair tread with 120-grit sandpaper to get back down to raw wood. This also opens up the wood fibers so that the oil finish can easily penetrate the surface.
After about 30 minutes of sanding, the wood looks clean and brand-new again!
Pro Tip: How to Fill Nail Holes
Nail holes need to be filled, but wood filler doesnt usually take stain or finish very well and you end up with ugly splotches of wood filler that doesnt match the rest of the wood tones. Heres a little trick I learned from my contractor friend, Josh, that minimizes the discrepancy between the wood filler and the natural wood tones.
Apply a base layer of stain, finish or whatever youre working withfirst, let it dry, and then apply the wood fillerafter. I also try to wipe away any excess and surrounding wood filler with a damp rag to get as much of the wood filler off the wood as possible. This way, Im decreasing the area that the wood filler is in contact with the wood so the difference between the filler and wood tones is a lot less noticeable.
The post Install a Stair Runner For A Revitalized and Safer Staircase appeared first on Family Handyman.
Article source here: Install a Stair Runner For A Revitalized and Safer Staircase
No comments:
Post a Comment